Screen Attributes - Omron NT-series Operation Manual

    
Switching the Continuous Screens by Using the Touch Switches
5-3-2

Screen Attributes

Reference
Buzzer Attribute
Reference
Numeral Setting Attribute
Continuous screens can be switched by using the [ ] and [ ] touch switches which
have the system key functions.
When creating the screen, create touch switches [ ] and [ ] to which the system
key functions are allocated. (Refer to "System key functions" (page 142).)
Production Status
Line A: Normal
Line B: Normal
Each screen can be set with a specific function by designating a screen attribute,
so that the specific function can be executed by displaying the screen. For exam-
ple, by displaying a screen to which a "buzzer attribute" has been set, the buzzer of
the NT600S starts sounding.
Use the support tool to set the screen attributes.
The following several attributes can be set with one screen.
This attribute will become effective to sound the buzzer in the NT600S when the
screen to which this attribute has been set is displayed. The buzzer sound can be
set as follows:
No:
Continuous sound:
Intermittent sound:
The buzzer sound is set with the NT600S memory switch. The buzzer can also be
set by using the PC/Host. Refer to "Using the buzzer" (page 94) for the buzzer
setting using the memory switch.
To stop the buzzer by using the screen operation, create a [buzzer stop] system
key as a touch switch.
Select whether the numeric keys are automatically displayed or the numeric keys
are created at arbitrary positions on the numeral setting screen. The following two
numeral setting attributes are used.
System: The numeric keys registered to the system are automatically dis-
played.
User: The numeric keys can be created at any arbitrary positions.
1/3
Buzzer does not sound when the screen is displayed.
Buzzer sounds continuously.
Buzzer sounds intermittently at constant intervals.
Section 4-3