Operation Modes And The System Menu; System Menu And The Operation Modes - Omron NT-series Operation Manual

    .     .
4-3

Operation Modes and the System Menu

4-3-1

System Menu and the Operation Modes

Power ON
The NT600S operates in either "RUN", "Transmit", or "Maintenance" mode. The
operation modes can be switched by using the System Menu.
Select an operation mode by pressing the corresponding touch switch in the Sys-
tem Menu. The operation modes with respect to the System Menu are related to
each other as shown below.
For the operations with the System Menu, refer to the "Operations with the System
Menu" (page 70).
RUN mode
The NT600S runs in this
state. Controls from the
PC/Host are enabled
and various indications
and I/O operations are
made.
When system settings
and screen data
registration have been
completed
[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
To change system
settings or screen
data contents
Section 3-3
Transmit Mode
Screen data and other
data are transmitted
between the NT600S
and a support tool.
Maintenance Mode
The NT600S
maintenance operations
such as memory initialize
and setting check are
executed.