Functions Of Nt600S; Features - Omron NT-series Operation Manual

   
2-2

Functions of NT600S

2-2-1

Features

Downsized Body
Construction Best Suited to the FA Environment
1:1 and 1:N Communications Possible with "NT Link" Method
The NT600S has the following features which are different from those of existing
NT600M;

The NT600S has thin depth (64 mm or less in the panel) in the NT series.

The width is shorter by 50 mm, maintaining the existing display area.

The tool connectors are located at the rear of the unit.

The communication cable connectors are housed in the unit so that they do not
protrude from the unit.

The tool connectors and the PC/Host communication connectors are used in
common.

Easy-to-read screen even in direct sunlight.

Two types of panel are available: the STN LCD panel with backlight and the am-
ber EL display panel.

Its backlight unit and battery can be replaced at the operation site.

Waterproofed to a standard equivalent to IP65 and NEMA 4.
POWER
RUN
400 dots
Wide angle of visibility,
50
to left and 40
to right

Connection in 1:1 and 1:N NT link systems is possible.

All you have to do is connect to the host; no complicated installation work is nec-
essary.

A flash memory is used for the screen data memory, making battery backup un-
necessary.

The following communication methods are standard: host link (direct), NT link
(1:1, 1:N), and RS-232C.
640 dots
Section 1-2