Method For Making The Cable For Connection To The Pc/Host - Omron NT-series Operation Manual

Method for Making the Cable for Connection to the PC/Host

Explained below is the method for making the cable that connects the NT600S and the PC/Host.
Connect the wires to the connectors in accordance with the connector specification for each unit.
Making the Cable for Connection to the PC
Parts Required
Two connectors, two connector covers and one cable are required to make up a connecting cable. One connector
and one connector cover is supplied with most PCs.
Name Model
Connector XM2A-0901
XM2A-2501
DB-25P
Connector XM2S-0911
Cover
XM2S-2511
DB-C2-J9
Note
Name
AWG28
IFVV-SB
Cable Cable


CO-MA-VV-SB
5P
APPENDIX E
Delivered with
C series CQM1, C200HS,
C200HX/HG/HE
CVM1/CV series CPU unit
CV500-LK201
C500-LK203
C500-LK201
C200H-LK201
C500-LK201-V1
C120-LK201-V1
C series CQM1, C200HS,
C200HX/HG/HE
CVM1/CV series CPU unit
CV500-LK201
C500-LK203
C500-LK201
C200H-LK201
C500-LK201-V1
C120-LK201-V1
When connecting the NT600S to an OMRON PLC C
connector hood must be prepared separately since they are not supplied with the



C H.
The connector provided in the CPU unit of the C
connection, the following connector and connector hood should be prepared.

Connector:

Connector hood: XM2S-0911 (9-pin type, OMRON)
Prepare the cable recommended by OMRON.
The recommended cables are indicated in the following table.
Type


5P
Multiconductor shielded cable (FUJIKURA, Ltd.)
Multiconductor shielded cable (HITACHI Cable, Ltd.)
28AWG
9-pin, manufactured by OMRON
25-pin, manufactured by OMRON
25-pin, manufactured by JAE
9-pin, manufactured by OMRON
25-pin, manufactured by OMRON
25-pin, manufactured by JAE
XM2A-0901 (9-pin type, OMRON)
Remark
Appendix E
Remarks



H , the connector and the



H is a 9-pin connector. For the