Ethernet-Service Sap Cvlan - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ethernet-service sap cvlan

ethernet-service sap cvlan
Associates customer VLAN (CVLAN) traffic with a VLAN Stacking Service Access Point (SAP). The
parameter values configured with this command are applied to frames received on all SAP UNI ports and
determines the type of customer traffic that is accepted on the UNI ports and processed by the service.
ethernet-service sap {sap_id} cvlan {all | cvlan_id | cvlan_id1-cvlan_id2 | untagged}
no ethernet-service sap {sap_id} cvlan {all | cvlan_id | cvlan_id1-cvlan_id2 | untagged}
Syntax Definitions
sap_id
all
cvlan_id
cvlan_id1-cvlan_id2
untagged
Defaults
By default, no CVLAN traffic is associated with the SAP ID when the SAP is created.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to remove a CVLAN ID or the designation for all or untagged
frames from the SAP. Note that when the last CVLAN parameter is deleted from an SAP
configuration, the SAP is not automatically deleted.
•
The all and untagged parameters are configurable in combination with a CVLAN ID. For example, if
untagged and a CVLAN ID are associated with the same SAP ID, then the SAP profile is applied to
only untagged traffic and traffic tagged with the specified CVLAN ID. All other traffic is dropped.
•
The SAP ID specified with this command must already exist. Use the ethernet-service sap command
to create a SAP.
•
Configuring the all and untagged parameters for the same SAP is not allowed. Specify only one of
these two parameters per SAP.
•
Either the all or untagged parameters can be configured for the SAP. In such an instance, the default
VLAN for the UNI ports associated with the SAP is changed to the VLAN assigned to the SAP related
service.
•
Only one SAP, with the all or untagged option, is allowed per UNI. For example, if UNI port 1/17 is
part of SAP 10 and SAP 20 and SAP 10 is configured for all traffic, then only untagged parameter or a
CVLAN ID is allowed for SAP 20.
page 34-16
The SAP ID number.
Applies the SAP profile to tagged and untagged frames.
Applies the SAP profile to frames tagged with this CVLAN ID.
Applies the SAP profile to frames tagged with a CVLAN ID that falls
within this range of CVLAN IDs (for example, 10-12 specifies frames
tagged with CVLAN 10, 11, or 12).
Applies the SAP profile only to untagged frames.
VLAN Stacking Commands
OmniSwitch CLI Reference Guide March 2011