File Retention - Savin 3699 Key Operator Tools

Key Operator Tools
J
Press [Exit] to return to the stand-
by display.
Printing the User Parameter List
Print this list to see the current User
Parameter settings.
A
Make sure that the machine is in
standby mode.
Note
If the "Fax Features" or "Key
Op. Tools" screen is shown,
press the {User Tools} key. If any
other display is shown, press
the {Clear Modes/Energy Saver}
key.
B
Press the {User Tools} key.
C
Enter the code for "Key Op.
9
Tools" with the number keys.
Then press the {#} key.
The "Fax Features" menu appears.
D
Enter the code for "System Set-
tings" with the number keys.
242
E
Enter the code for "Prt. User.
Param." with the number keys.
F
Press the {Start} key to print the
list.
Note
If you press [Cancel] before
printing starts, the printing
stops and the display shown in
E appears again.
G
Press [PrevMenu] twice.
H
Press [Exit] to return to the stand-
by display.

File Retention

If a connection could not be made to
the other party during a Memory
Transmission even though the num-
ber was redialed the stipulated num-
ber of times, this setting specifies
whether or not the file/document is
preserved in memory.
If a file/document is stored in memo-
ry, you can easily resent it without
having to scan it in again.
A
Make sure that the machine is in
standby mode.