Memory Capacity And Paper Size - Savin MLP31n Operating Instructions Manual

1. Preparing for Printing

Memory Capacity and Paper Size

Additional memory apart from standard memory may be required depending on the paper size and data
1
type.
• Available paper sizes change depending on the selection you made for [Memory Usage] in the
System menu.
• Only single-sided printing is possible on paper fed from the bypass tray. Duplex printing is not possible
on paper that is fed from the bypass tray.
The table below shows the total SDRAM module capacities.
Standard
192 MB
*1
128 MB
*1
128 MB
*1
Remove the default SDRAM module (64 MB) before installing the optional SDRAM module.
Font Priority
• Only single-sided printing (600 × 600 dpi)
192/256/384 MB:
• A4, B5 JIS, A5, Letter, Legal, and maximum custom sized paper can be printed on.
• Only single-sided printing (1200 × 600 dpi)
192/256/384 MB:
• A4, B5 JIS, A5, Letter, Legal, and maximum custom sized paper can be printed on.
• Duplex printing (600 × 600 dpi)
192/256/384 MB:
• A4, B5 JIS, A5, Letter, and Legal sized paper can be printed on.
• Duplex printing (1200 × 600 dpi)
192/256/384 MB:
• A4, B5 JIS, A5, Letter, and Legal sized paper can be printed on.
Frame Priority
• Only single-sided printing (600 × 600 dpi)
192/256/384 MB:
• A4, B5 JIS, A5, Letter, Legal and maximum custom sized paper can be printed on.
64
Extended
-
128 MB
256 MB
Total
192 MB
256 MB
384 MB