How To Select The Sewing Pattern - JUKI AP-876/IP-420 Instruction Manual

2-6. How to select the sewing pattern

A
C
1 Display the data input screen.
Only n case of the data nput screen (blue), the selecton of
sewng shape can be performed. In case of the sewng screen
(green), press READY key
screen (blue).
2 call the sewing shape selection screen.
Press SEWING SHAPE button A and the sewng shape
selecton screen s dsplayed.
3 Select the sewing shape.
There are 2 knds of the sewng shape.
Press SEWING SHAPE SELECTION button
B
4 Determine the kind of sewing shape.
There are 2 knds below of the sewng shape. Select the knd
you desre from among them.
Pictograph
Users' pattern
Vector format data
D
Be sure to use the media that has been formatted with
IP-420.
For the formatting procedure of the media, refer to
"@-2-32. Performing formatting of the media" p.95.
Select the sewng shape you desre from SEWING SHAPE SE-
LECTION buttons C and press ENTER
The sewng shape lst screen correspondng to the knd of sewng
shape you selected s dsplayed.
– 38 –
and dsplay the data nput
Maximum number of
Name
D button.
B .
patterns
999
999