Copying Pattern Button - JUKI AP-876/IP-420 Instruction Manual

2-23. copying pattern button

The sewng data of the pattern button No. whch has already been regstered can be coped to the pat-
tern button No. whch s not regstered. Overwrtng copy of the pattern button s prohbted. When you
desre to overwrte, perform t after deletng the pattern button once.
"@-2-21. Performing pattern button No. selection"
/ Refer to
A
B
G
D
E F
1 Display the data input screen.
Only n case of the data nput screen (blue) at the tme of pat-
tern button selecton, t s possble to copy. In case of the sew-
ng screen (green), press READY swtch
data nput screen (blue).
2 call the pattern copy screen.
When PATTERN BUTTON COPY button
the pattern button copy (copy source selecton) screen s ds-
played.
3 Select the pattern No. of copy source.
Select the pattern button No. of copy source from the pattern
button lst button B .
Next, press COPY DESTINATION INPUT button
the copy destnaton nput screen s dsplayed.
C
4 Input the pattern No. of copy destination.
Input the pattern button No. of copy destnaton wth ten keys D .
Pattern button No. whch s not used yet can be retreved wth
– and + buttons
In addton, the folder to be stored can be selected wth FOLD-
ER SELECTION button
5 Start copying.
When ENTER button
H
coped pattern button No. n the selecton state returns to the
pattern button copy (copy source selecton) screen after ap-
proxmately two seconds.
* Combnaton data can be coped n the same way.
– 68 –
p.65.
to dsplay the
A s pressed,
( F and E ).
G .
H s pressed, copyng starts. The
C and