Using Counter; () SettNg Procedure Of The Counter - JUKI AP-876/IP-420 Instruction Manual

2-16. using counter

(1) Setting procedure of the counter
A
B
C
D
1 Display the counter setting screen.
Press swtch and the COUNTER SETTING button
A s dsplayed on the screen. When ths button s pressed, the
counter settng screen s dsplayed.
2 Selection of kinds of counters
Ths sewng machne has three dfferent counters; .e., the
sewng counter, No. of pcs. counter and bobbn counter. When
SEWING COUNTER TYPE SELECT button
PCS. COUNTER TYPE SELECT button
COUNTER TYPE SELECT button
correspondng counter type select screen s dsplayed. On ths
screen, the counter type can be selected ndvdually.
uP counter :
Every tme the sewng of one shape s performed, the exstng
value s counted up. When the exstng value s equal to the set
value, the count-up screen s dsplayed.
DoWN counter :
Every tme the sewng of one shape s performed, the exstng
value s counted down. When the exstng value s reached to "0",
the count-up screen s dsplayed.
counter disuse :
The sewing counter does not count a finished shape even when
the machne has sewn the shape. The counter screen of the
sewng counter s not dsplayed.
uP counter :
Every tme one combnaton sewng s performed, the exstng
value s counted up. When the exstng value s equal to the set
value, the count-up screen s dsplayed.
DoWN counter :
Every tme one combnaton sewng s performed, the exstng
value s counted down. When the exstng value s reached to "0",
the count-up screen s dsplayed.
counter disuse:
The No. of pcs. counter does not perform countng. The counter
screen of the No. of pcs. counter s not dsplayed.
– 54 –
D s pressed, the
[ Sewing counter ]
[ No. of pcs. counter ]
B , NO. OF
C or BOBBIN