Removing The Foamed Polystyrene From The Folding Unit; Mounting The Pattern - JUKI AP-876/IP-420 Instruction Manual

3-12. Removing the foamed polystyrene from the folding unit

2
1
A

3-13. Mounting the Pattern

For the mounting of pattern, refer to
3
B
"@-2-5. Replacing the pattern"
1) Remove binding cord 1 . Supply air to the machine
and turn the power ON.
2) Press Set Ready key
3) If error No. 30 is displayed on the operation panel,
press Reset button
4) After folding unit 2 goes up, remove foamed poly-
styrene 3 from the folding unit and turn the power
OFF.
p.36.
11
－ －
A .
B .