JUKI AP-876/IP-420 Instruction Manual page 27

7
4
6
5
8
Setscrew 2
cylinder
5
Presser
plate 1
Folding plate 3
2
1
3
Setscrew 8
Pocket longitudinal
1
folding plate 9
Pocket presser
plate !0
2
2.8
(3) adjusting the folding plate
) Adjustng the foldng plate n terms of the longtud-
nal drecton.
Loosen presser plate 1 setscrews 2 . Adjust fold-
ng plate 3 mounted on presser plate 1 n the d-
recton of arrow 4 (vertcal drecton).
2) Adjustng the foldng plate n terms of the thrust d-
recton.
Loosen setscrews 5 of foldng plate 3 . Adjust the
foldng plate n terms of the thrust drecton.
In addton, loosen setscrew 7 of foldng plate
(pocket lp folder) 6 . Adjust the foldng plate n
terms of the thrust drecton.
3) For the fixing position of pocket longitudinal folding
plate 9 , fix it by means of pocket longitudinal plate
setscrews 8 wth spaced 2 mm from the pocket
presser plate.
4) Adjust the heght of foldng plate 3 so that t s ap-
proxmately 2.8 mm above the bottom of pocket
presser plate !0 .
When adjustng the longtudnal poston of the cyl-
nder, provde a clearance of an approxmately 
mm between foldng plate 3 and pocket longtud-
nal foldng plate 9 .
23
－ －