Table of Contents
Advertisement
Slider
B
a
Lock plate
Pattern board
Within this range when
the lock lever is locked
Forward
pattern board top surface
4) Move the slders n B drecton, and replace
a
B
5) Remove the current pattern and change t
Loosen
tighten
6) When enter button
7) Input the pattern number of the pattern at-
B
– 37 –
the presser plate wth another one.
when the slder s moved n a drecton, t s n
the "lock" state.
wth another one. Then, lock the lock lever.
1. If the lock lever is not placed within
the illustrated range when it is
locked, the lock lever can come in
contact with other components,
resulting in a sensor error and de-
fective folding. carefully determine
the position of the lock lever.
turning the lock lever while drawing
it sideways can change the position
of the lock lever in the locked state.
2. Be sure to press in the lock plate
until its side face comes in contact
with lock lever.
the pattern changng, the presser plate comes
down, the pattern board moves to the far sde,
the foldng unt returns to the upper poston,
and the ar to the foldng cylnder wll be sup-
pled.
tached n place of the prevous one referrng
"@-2-6. How to select the sewing pattern "
to
p.38
If you have changed the pattern, check
to be sure that the pattern groove on
the holder matches the sewing pattern
referring to the description given in
"@-2-7. Pattern checking procedure"
p.40.
B s pressed after
Advertisement
Table of Contents
