Table of Contents
Advertisement
2-3. Basic operation of IP-420
A
B
1. Confirm the pattern shape before sewing. Should the pattern protrude from the presser
plate, needle interferes with the presser plate during sewing, and there is a danger of
needle breakage or the like.
2. When the presser plate is at its upper position, it moves after coming down. take care
not to allow your fingers to be caught under the presser plate.
3. When turning oFF the power without pressing rEaDY key
tern No.", "Max. sewing speed" or "Thread tension" is not stored in memory.
4. Do not turn the power off while the data is being written. If you turn the power off, the
data in storage can be lost and the selected pattern number can be lost.
1 turn oN the power switch
When the power is turned ON first, the language selection
screen s dsplayed. Set the language you use. (It s possble
to change wth Memory swtch
When ending the selection screen with caNcEL but-
ton
or ENtEr button
language selection, the language selection screen is
displayed whenever the power is turned oN.
2 Select the pattern No. you desire to sew.
When the power s turned ON, the data nput screen s ds-
played. If pattern select button A whch ndcates the shape
whch s currently selected s shown on the center secton of
the screen, you can select the sewng pattern by pressng the
"@-2-6. How to select the sewing pattern"
button. Refer to
p.38
for how to select the sewng pattern.
When READY key
dsplay s changed to green, and the sewng machne s set to
the sewng possble state.
3 Start sewing.
* For the screen, refer to
time of sewing pattern selection" p.32
– 3 –
.)
without performing the
B s pressed, the back color of LCD
"@-2-4. Liquid crystal display at the
p.32.
, the set value of "Pat-
Advertisement
Table of Contents
