Performing Combination Sewing; () How To Create New CombNatOn Data - JUKI AP-876/IP-420 Instruction Manual

2-26. Performing combination sewing

Frst, change the sewng mode to the combnaton sewng before performng settng.
"@-2-24. changing sewing mode"
/ Refer to
(1) How to create new combination data
A
C
F
p.69.
1 Display the data input screen.
Only n case of the data nput screen (pnk) t s possble to n-
put the combnaton data. In case of the sewng screen (green),
press READY swtch
(pnk).
When new combnaton sewng data s regstered by means
on the new combnaton data regstraton button
data nput screen, the screen at left s dsplayed. / Refer to
"@-2-19. Performing new register of pattern button"
2 Display the pattern No. selection screen.
When PATTERN SELECTION button
pattern No. selecton screen s dsplayed.
3 Select the pattern No.
E
When UP/DOWN SCROLL button
D
pattern No. buttons C whch have been regstered are
changed over n order.
B
It s also possble to dsplay the pattern No. nput screen by
means of NUMBER INPUT button
tern No. drectly. The contents of pattern data are dsplayed n
the buttons. Here, press the pattern No. buttons you desre to
select.
4 Determine the pattern No.
When ENTER button
lection screen is closed and the selection is finished.
5 repeat steps 2 through 4 as many as the number of pat-
tern Nos. you desire to register.
When the first register is determined, the second pattern selec-
ton button
Repeat steps 2 through 4 as many as the number of pattern
Nos. you desre to regster.
– 74 –
to dsplay the data nput screen
E s pressed, the pattern No. se-
F s dsplayed.
on the
p.60.
A s pressed, the
B s pressed,
D and nput a pat-