Changing Item Data - JUKI AP-876/IP-420 Instruction Manual

2-8. changing item data

A
Item range
Thread tenson
A
Max. speed lmtaton
B
＊ Thread tenson dffers wth the pattern to be selected.
＊ The maxmum entry range and the ntal value of the maxmum sewng speed B are determned by
the Memory swtch
C
E
1 Display the data input screen.
In case of the data nput screen, the change of tem data
can be changed. In case of the sewng screen (green), press
READY swtch
* the thread tension can also be changed on the sewing
B
screen.
2 Display the item data input screen.
When the button of the tem data you desre to change s
pressed, the tem data nput screen s dsplayed.
Item data are 2 tems below.
Input range
0 to 200
500 to 4,000 (st/mn)
.
For example, nput a thread tenson.
Press A to dsplay the tem data nput screen.
3 Input the data.
Input the value you desre wth ten keys and + / – keys C .
4 Determine the data.
When ENTER button
mned.
D
If you turn the power oFF without pressing the rEaDY
key
the "maximum number of revolutions" will not be
stored in memory.
If the thread tenson value of the user pattern or meda pattern or
the thread tenson command s added or deleted, settng change
dsplay E s shown on the pattern type secton.
– 4 –
to dsplay the data nput screen (blue).
D s pressed, the data s deter-
, the set values of the "thread tension" and
Initial value
Pattern set value
4,000 (st/mn)