Assembling The Stacker Safety Pipe - JUKI AP-876/IP-420 Instruction Manual

3-3. Assembling the stacker safety pipe

3
2
1） Fix stacker safety pipe 1 on the main body by means of pipe clamp 2 and setscrews 3 .
2） Insert two pipes into pipe joint 4 and fix with screws 5 and nuts 6 .
(1) Removing the sewing product
A
Sewing screen
B
Stacker release screen
－
1
4
5
6
1） To remove the sewing product from the sewing ma-
chine, press stacker lever release button
on the sewing screen to release the stacker presser
lever.
The screen changes over to "stacker release
screen".
When the cancel butto
the removal of the sewing product, the screen is
changed over to the sewing screen and the stacker
presser lever closes.

－
2
3
A
B is pressed after