JUKI AP-876/IP-420 Instruction Manual page 109

Error
Display
code
Y motor position slip error
E927
Thread trimming motor
E928
position slip error
E931 X motor overload error
Y motor overload error
E932
Thread trimming motor
E933
overload error
X/Y motor out of range error
E936
MAIN CONTROL p.c.b
E943
trouble
When data writing to MAIN
CONTROL p.c.b. cannot be
performed
E991 Presser plate initial
operation fault
In the case the needle bar
rests on the presser plate
cylinder movement path when
the origin retrieval is carried
out.
Pattern plate origin retrieval
E992
error
The pattern plate motor origin
sensor fails to detect the
origin.
E994 Pattern plate motor step-out
error
Step-out of the pattern plate
motor is detected.
Description of error
– 105 –
Display message
How to Place of
recover recovery
Turn OFF
the power
Turn OFF
the power
Turn OFF
the power
Turn OFF
the power
Turn OFF
the power
Turn OFF
the power
Turn OFF
the power
Possible Data
to re-start
input
after reset.
screen
Turn OFF
the power
Possible Data
to re-start
input
after reset.
screen