Changing The Folding Position - JUKI AP-876/IP-420 Instruction Manual

2-12. changing the folding position

WarNING :
to avoid possible accidents caused by abrupt start of the machine, check to be sure that no one
places hand, finger and face or any tool in the moving part of the main unit before operating the
switches (keys).
The poston of the pattern board and the holder can be adjusted n ncrements of 0. mm up to the back
and forth and rght and left wthn 9.9 mm.
A
Sewng screen
B
Foldng poston adjustng screen
1 Display the sewing screen.
Press FOLDING POSITION CHANGE button
the sewng screen, the presser moves to the foldng poston
and wats there, and the foldng poston adjustng screen s
dsplayed.
the machine automatically performs the aforemen-
tioned procedure. Do not play your hand or any
matter on the table.
Name
G
C
PRESSER
B
TRAVEL buttons
D
E
X-DIRECTION
C
POSITION
Y-DIRECTION
F
D
POSITION
PRESSER
E
DOWN/UP button
ENTER button
F
CANCEL button
G
– 48 –
Function overview
Ths buttons are used to move the presser
n the drecton of the arrow of the button
pressed n ncrements of 0. mm when the
presser s n the upper poston.
When one of the buttons s held pressed for a
longer tme, the presser moves contnuously.
If the presser s n the lower poston, t wll not
move even f one of the buttons s pressed.
When ths button s pressed, the correcton
value s dsplayed.
When ths button s pressed, the correcton
value s dsplayed.
Ths button s used to lower the presser. When
ths button s pressed agan, the presser goes
up.
This button is used to confirm the correction
value and close the screen. The presser
moves to the ntermedate standby poston.
Ths button s used to cancel the correcton
value and close the screen. The presser
moves to the ntermedate standby poston.
A on