JUKI AP-876/IP-420 Instruction Manual page 86

Button and display
MANUAL/AUTOMATIC/
A
STEP settng dsplay
MATERIAL RELEASE
B
button
FOLDING POSITION
C
CHANGE button
FOLDING TIMING
D
CHANGE button
PRESSER DOWN button
E
PATTERN NO./TYPE
F
dsplay
SEWING SHAPE dsplay
G
NUMBER OF STITCHES
H
dsplay
X ACTUAL SIZE VALUE
I
dsplay
Y ACTUAL SIZE VALUE
J
dsplay
PATTERN NAME dsplay
K
COUNTER VALUE
L
CHANGE button
CLEAR button
M
SHAPE CHECK button
N
RETURN TO ORIGIN
O
button
Every tme ths button s pressed, the mode s changed over n the order of
"
→ →
"@-2-10. Setting the MaNuaL/autoMatIc/StEP"
/ Refer to
The materal presser of the stacker opens to allow the sewng product n the
stacker to be taken out.
"@-2-15. Stacker operation (taking out the material)"
/Refer to
The foldng poston change screen s dsplayed.
"@-2-12. changing the folding position"
/Refer to
Ths s the button to change the order of foldng-tmng operaton and to change
enable/dsable of the foldng unt.
"@-2-11. changing the folding timing"
/ Refer to
The presser arm, presser plate presser plunger come down, and the presser
down screen s dsplayed.
"@-2-14. Lowering the presser" p.52.
/ Refer to
The pattern No. and type of the pattern whch s beng selected are dsplayed.
The sewng shape of the currently selected pattern s dsplayed.
The number of sttches for the currently selected pattern s dsplayed.
The actual X sze value of the sewng shape whch s beng selected s dsplayed.
The actual Y sze value of the sewng shape whch s beng selected s dsplayed.
The name of the currently selected pattern s dsplayed.
The counter value s changed usng PLUS button S or MINUS button T . The
counter value s ndcated on the button. When the button s pressed, Q s
dsplayed to allow the counter value to be changed.
The current counter value s ndcated on edt data dsplay R .
"@-2-16. using counter"
/Refer to
The counter value s cleared.
* Ths button s dsplayed only when COUNTER VALUE CHANGE button L s
beng selected.
The shape of the pattern whch s beng selected s checked usng PLUS button
S or MINUS button T . The current number of sttches s ndcated on edt data
dsplay R .
Durng the pattern shape checkng, the SEWING SHAPE dsplay G s shown
wth the current pont (pink circle). To finish the pattern shape checking, press
the SHAPE CHECK button agan.
Ths button s used to return the presser plate to the start pont of sewng at the
tme of the temporary stop or pattern shape checkng.
– 82 –
Description
".
p.48.
p.45.
p.54.
p.44.
p.53.