Performing New Register Of Pattern Button - JUKI AP-876/IP-420 Instruction Manual

2-19. Performing new register of pattern button

A
E
B
D
C
1 Display the data input screen.
Only n case of the data nput screen (blue), new regster of the
pattern button can be performed. In case of the sewng screen
(green), press READY swtch
screen (blue).
2 call the new register of pattern button screen.
Press NEW REGISTER button
of pattern button screen s dsplayed.
3 Input the pattern button No.
Input the pattern button No. you desre to newly regster wth
the ten keys B . New regster to the pattern button No. whch
has been already regstered s prohbted.
It s possble to retreve the pattern button No. whch has not
F
been regstered wth the "+" or "–" button
4 Select the folder to be stored.
It is possible for the pattern buttons to be stored in five folders.
As many as 0 pattern buttons can be stored for one folder.
The folder to store the button can be selected wth FOLDER
SELECTION button
5 Determine the pattern No.
When ENTER button
is confirmed. The display screen is changed over to the data
nput screen at the tme of pattern button selecton.
/ Refer to "@-2-20 LcD display section at the time of
pattern button selection" p.61.
– 60 –
and dsplay the data nput
A and the new regster
E .
F s pressed, the pattern number
( C and D ).