Fade-In/Fade-Out Of Specified Data Range - Zoom MRS-1266 Operation Manual

Multitrack recording studio
Table of Contents

Advertisement

Reference [Track Editing]
Trim Src
Trim Src
START
START
0 0 0 0
2.
Use the cursor left/right keys to move the flashing
section of the counter, and turn the dial to specify
the range start point.
You can also specify the point as a mark.
3.
Press the [ENTER] key.
The display changes to "Trm Src END".
Trim Src
Trim Src
END
END
0 0 16 300
4.
Use the same procedure as in step 2 to specify the
range end point.
All data after this point will be erased.
R
If you press the PLAY [
played.
5.
Press the [ENTER] key.
The indication "Trim SURE?" appears on the display.
6.
To execute the trimming operation, press the
[ENTER] key.
By using the [EXIT] key instead of the [ENTER] key, you
can move back to previous screens.
When the trimming operation is executed, the indication
"Trim COMPLETE" appears on the display, and the unit
returns to the track edit menu.
58
00.
00.
001- 1
001- 1
00 00
010- 3
010- 3
] key, the specified range will be
Fade-in/fade-out of specified data
range
You can fade in or fade out the audio data over a specified
range.
Fade-in
N
OTE
The fade-in/out command does not simply alter the track
volume. Rather, it rewrites the waveform data and is
therefore not reversible once executed. If you want to retain
the condition before editing, use the capture function for that
track (
p. 63).
1.
Refer to steps 1 - 6 of "Basic editing steps" to
select the track/V-take for fade-in or fade-out, and
press the [ENTER] key.
The display changes as follows. This screen lets you specify
the start point for fade-in or fade-out.
Fade Src
Fade Src
START
START
0 0 0 0
2.
Use the cursor left/right keys to move the flashing
section of the counter, and turn the dial to specify
the fade-in or fade-out start point.
You can also specify the point as a mark.
3.
Press the [ENTER] key.
The display changes to "Fade Src END".
Fade Src
Fade Src
END
END
0 0 4 260
4.
Use the same procedure as in step 2 to specify the
fade-in or fade-out end point.
R
If you press the PLAY [
specified V-take will be played.
00.
00.
001- 1
001- 1
00 00
003- 1
003- 1
] key, the specified range of the
ZOOM MRS-1266

Advertisement

Table of Contents
loading

Table of Contents