Fade-In/Fade-Out Of Specified Data Range - Zoom MRS-8 Operation Manual

Reference [Track Editing]
2.
Use the cursor left/right keys to move the
flashing section of the counter, and turn the
dial to specify the start point.
The point can be specified in minutes/seconds/
milliseconds, or in measures/beats/ticks.
HINT
If you specify a point where no audio data exist, the second
line of the display shows *.
3.
Press the [ENTER] key.
The display changes to "Trim Src END". This screen lets
you specify the end point of the range that you want to
keep.
Trim Src Trim Src
END END
4 10 0
4.
Specify the end point in the same way as
described in step 2.
If you press the PLAY [ R ] key at this point, the specified
range will be played.
5.
Press the [ENTER] key.
The indication "Trim SURE?" appears on the display.
6.
To carry out the trimming operation, press
the [ENTER] key.
When the trimming operation is completed, the unit
returns to the track edit menu.
By pressing the [EXIT] key instead of the [ENTER] key,
you can cancel the operation and back up one step at a
time.
Fade-in/fade-out of specified
data range
You can fade in or fade out the audio data over a specified
range.
Fade-in
1.
Refer to steps 1 – 6 of "Basic steps for
range editing" to select the track for fade-
in or fade-out, and press the [ENTER] key.
48
96- 4-16
00
The display changes as follows. In this condition, you can
specify the fade-in/out start point.
Fade Src Fade Src
START START
0 0 0
2.
Use the cursor left/right keys to move the
flashing section of the counter, and turn the
dial to specify the fade-in/out start point.
The point can be specified in minutes/seconds/
milliseconds, or in measures/beats/ticks.
HINT
If you specify a point where no audio data exist, the second
line of the display shows *.
3.
Press the [ENTER] key.
The display changes to "Fade Src END". This screen lets
you specify the fade-in/out end point.
Fade Src Fade Src
END END
0 10 0
4.
Specify the fade-in/out end point in the
same way as described in step 2.
If you press the PLAY [ R ] key at this point, the specified
range will be played.
5.
Press the [ENTER] key.
The display changes as follows.
Fade Src Fade Src
CURVE CURVE
Volume change curve
6.
Turn the dial to select the fade-in or fade-
out curve.
Curves I-1 to I-3 are for fade-in, and curves o-1 to o-3 are
for fade-out. The different kinds of curves look as
follows.
1- 1- 0
00
4- 4-17
00
1-1
ZOOM MRS-8