Table of Contents
Advertisement
Introduction
Thank you for selecting the ZOOM RFX-2000 (hereafter simply called the "RFX-2000"). The
RFX-2000 is a sophisticated digital reverb and multi-effect processor with the following features
and functions.
• Versatile effects and high-quality reverb
The RFX-2000 comes with a full complement of 48 preset effects (8 effects x 6 banks). The
reverb effects alone allow 121 different settings. The convincing sound stage created by the
RFX-2000 far surpasses anything else available in this class.
• 100 patch memory for immediate use
Up to 100 patches (effect settings) can be stored in the internal memory. Calling up any patch is
quick and easy.
• Supplied editing software
The RFX-2000 is supplied with nifty software that lets you manage and edit patches on a
computer. (Versions for Windows 95/98 and Macintosh are included.) Besides patch editing and
management, the software also provides access to eight additional effects including a 31-band
graphic equalizer and a 20-tap delay effect.
• Digital output
The S/PDIF output (with optical and coaxial connectors) allows connection to consumer
equipment with digital input (digital multitrack recorder, MD recorder, DAT recorder or
similar), keeping the signal in the digital domain.
• MIC IN jack
The dedicated microphone jack on the front panel comes in handy for creating vocal effects
without having to make cumbersome connections in the rear. Controlling the VOCODER effect
is a snap thanks to this feature.
• Built-in tap input
Time-based parameters such as delay time can be entered directly, using the tap input feature.
This makes it easy for example to match the delay time to the tempo of a song.
• MIDI based control
Functions such as patch switching, real-time parameter control, and storing of patch data on
external equipment can be performed via a MIDI link.
Please take the time to read this manual carefully so as to get the most out of your RFX-2000 and to
ensure optimum performance and reliability. Retain this manual, the warranty card and all other
documentation for future reference.
* Windows 95 and Windows 98 are registered trademarks of Microsoft Corporation.
* Macintosh is a registered trademark of Apple Computer Inc.
Contents
• • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • •
OPERATION MANUAL
2
• • • • • • • • • • • • • • • • •
2
2
4
4
6
7
8
10
• • • • •
• • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • •
• • • • •
13
14
24
24
25
26
27
Advertisement
Table of Contents
Related Manuals for Zoom RFX-2000
Summary of Contents for Zoom RFX-2000
-
Page 1: Table Of Contents
MIDI link. Please take the time to read this manual carefully so as to get the most out of your RFX-2000 and to ensure optimum performance and reliability. Retain this manual, the warranty card and all other documentation for future reference. -
Page 2: Controls And Functions
(3) DIGITAL OUT connectors entire operation of the RFX-2000 from a computer, using The same signal as available at the OUTPUT jacks is the supplied editor/librarian software. - Page 3 (6) POWER (AC adapter) connector Connect these jacks to the recorder or playback system. The supplied AC adapter is to be connected here for powering the unit. (5) INPUT jacks Connect a line-level source, such as an instrument or CD ZOOM RFX-2000...
-
Page 4: Rack Mounting
Otherwise heat may or to other equipment. Getting Connected This section shows how to connect the RFX-2000 to the sound source and to the playback system. Insert Connection Rhythm machine, synthesizer, or similar Guitar effect... - Page 5 SFX bank. Connect a dynamic microphone to the the VOCODER effect. front-panel MIC IN jack on the RFX-2000. Connect a If nothing is connected to the MIC IN jack, the signal supplied synthesizer or other instrument to the rear-panel INPUT to the INPUT L/MONO jack is controlled by the signal L/MONO jack.
-
Page 6: Trying Out The Effects
While playing the sound source, turn up the Selecting a Patch The memory of the RFX-2000 contains 100 stored patches. The display shows the number of the currently selected patch (01, 02,...99, 00). This condition is called the play mode. -
Page 7: Editing A Patch
LED of the EFFECT TYPE selector lights up. When the setting is returned to the original effect, the LED goes out. • When calling up a patch, the LED of the bank where the patch is stored lights up. ZOOM RFX-2000... -
Page 8: Useful Functions
Changing the Value of an Effect Parameter Each effect of the RFX-2000 consists of certain effect parameters which determine the intensity and tone character of the effect. Effect parameters can be adjusted with the following edit controls. MIX control REV CHARACTER (EDIT 1) control... - Page 9 Setting Parameters With the Tap Key (Tap Input) The RFX-2000 allows input of time-based parameters by tapping the TAP key at the desired intervals. For example, the flanger modulation speed or delay time can be easily matched to the tempo of a song in this way.
-
Page 10: Using The Midi Control Function
Sometimes it may be desirable to assign specific program change numbers to the patch numbers of the RFX-2000. (For example to call up patch number 1 of the RFX-2000 when the tone associated with program change 100 of a synthesizer is selected.) In such a case, you can use the so-called learn table in the memory of the RFX-2000 to change the program change number assigned to the patch number. - Page 11 Changing Effect Parameters Via MIDI The effect parameters of the RFX-2000 can be changed using MIDI control change messages sent from an external MIDI device (MIDI keyboard or sequencer or similar). This is useful to change parameters from a separate location.
- Page 12 The patch information and learn table information stored internally in the RFX-2000 can be output via the MIDI link. This can be used for example to exchange settings between two RFX-2000 units, or to store the data on a MIDI sequencer. The data can then be reloaded into the RFX-2000 whenever required.
-
Page 13: Returning The Rfx-2000 To The Factory Default Settings
MIDI device, set the device to the Data Transfer (Receive) This section describes how to load patch data and learn table data stored on an external MIDI device back into the RFX-2000. • When sending data to or loading data from an external... -
Page 14: Rfx-2000 Effects
RFX-2000 Effects This section lists all the effects and parameters available in the RFX-2000. For effects from the EXTRA bank (which can be called up only from a computer), only the parameters that can be adjusted with the front-panel controls of the RFX-2000 are described. - Page 15 10 Choral Mix Rich ambience for chorus and vocal ••••••••••• 10 Vocal/1 ensembles. Increases the power impact of vocals. ••••••••••••••••• 11 Percussion Mix 11 Vocal/2 Ambience suitable for percussion Suitable for ballad type vocals. •••• ••••••••••••••••• ensembles. ZOOM RFX-2000...
- Page 16 Adjusts the amount of Adjusts the flanger Adjusts the delay time Adjusts the amount of flanger feedback. fluctuation cycle. in 10-ms units delay feedback. MUTE (75:743ms). 1 - 11 1 - 50 1 - 75 0 - 30 Setting range ZOOM RFX-2000...
- Page 17 MUTE 1 - 5: 4, 6, 8, 10 (normal phase) 6 - 11: 4, 6, 8, 10, 12, 16 (opposite phase) Setting range 1 - 11 1 - 30 1 - 50 0 - 30 ZOOM RFX-2000...
- Page 18 Adjusts the delay time Adjusts the amount of Adjusts the feedback Description change range. change sensitivity. feedback. polarity. -1: reverse MUTE phase, 1: normal phase 1 - 11 1 - 50 0 - 30 -1, 1 Setting range ZOOM RFX-2000...
- Page 19 Adjusts the EQ High Description of the effect, that is the duration. cut/boost amount. cut/boost amount. level from which the MUTE reverb is applied. Setting range 1 - 11 1 - 30 -12 - 12 -12 - 12 ZOOM RFX-2000...
- Page 20 LFO Rate [TAP] LFO Depth Parameter Adjusts the resonance Adjusts the cutoff Adjusts the LFO cycle. Adjusts the LFO Description frequency. change range. MUTE Setting range 1 - 11 1 - 30 1 - 50 0 - 30 ZOOM RFX-2000...
- Page 21 THRU 1 - 6: Compressor 7 - 11: Limiter (higher values result in longer release time) 1 - 11 1 - 16 -12 - +12 -12 - +12 Setting range ZOOM RFX-2000...
- Page 22 RFX-2000 are described. Using the supplied software, all parameters can be adjusted. When checking the effect number while an effect from the EXTRA bank is selected, the effect number is shown with a preceding "E", such as "E1, "E2, etc.
- Page 23 (in 0.5-dB steps) dB (in 0.5-dB steps) dB (in 0.5-dB steps) THRU equalizer. 50: 0 dB 50: 0 dB 50: 0 dB Setting range 1 - 11 0 - 50 0 - 50 0 - 50 ZOOM RFX-2000...
-
Page 24: Supplied Software
EXTRA bank the computer. Information about all patches of the RFX- in the memory of the RFX-2000, the effect can then be 2000 is sent to the computer via a MIDI link and can be called up like other patches, and some major parameters of stored on the hard disk as a project file. -
Page 25: Specifications
20 bit, 64 times oversampling MIDI THRU • D/A converter 20 bit, 128 times oversampling BYPASS(FS01) • DSP • Power requirements Zoom original ZFX-2 (24-bit signal processing) Applied AC adapter 12 V AC (AD-0008) • Rear Inputs • Dimensions L/MONO, R:... -
Page 26: Midi Implimentation Chart
MIDI Implimentation Chart [EFFECTOR Date : 20 Sep, 1999 Model RFX-2000 MIDI Implimentation Chart Version :1.00 +---------------------+--------------------+--------------------+---------------------+ Transmitted Recognized Remarks Function ... +---------------------+--------------------+--------------------+---------------------+ |Basic Default | 1-16 OFF | 1-16,OFF | Memorized |Channel Changed | 1-16 OFF | 1-16,OFF | See Note1... -
Page 27: Safety Precautions/Usage Precautions
When using the RFX-2000 in an area with a different • Cleaning line voltage, please consult your local ZOOM Use a soft, dry cloth to clean the RFX-2000. If necessary, distributor about acquiring a proper AC adapter. slightly moisten the cloth. Do not use abrasive cleanser, wax, or solvents (such as paint thinner or cleaning alcohol), •... - Page 28 ZOOM CORPORATION NOAH Bldg., 2-10-2, Miyanishi-cho, Fuchu-shi, Tokyo 183-0022, Japan PHONE: +81-42-369-7116 FAX: +81-42-369-7115 Printed in Japan RFX-2000-5000...