Table of Contents
Advertisement
Adjusting the input gain
The input sensitivity of Inputs 1–4 can be adjusted.
1.
Use
to adjust the input signals while inputting sound from instruments and mics.
Level indicators
: Input signal present. (−48 dBFS or higher)
: Input signal is clipping. (−1 dBFS or higher)
NOTE:
• Set these so that their level indicators do not light red.
• To minimize noise, set the gain for any input jack not being used to 0.
• When the Stereo Link switch is on, the input gain for both Inputs 3 and 4 is controlled by Gain knob 3. (→
Stereo link
overview)
18
Advertisement
Table of Contents
