Fan Module; Sbar Card Menu; Switchover Ctp Dialog Box - HP Surestore 64 - Director Switch User Manual

Figure 21: Switchover CTP dialog box

Fan Module

Double-click a cooling fan module card in the Hardware View to display the
FRU Properties dialog box with the following option:

SBAR Card Menu

Right-click an SBAR card in the Hardware View to display a menu with the
following options:
Director Product Manager User Guide
If you click the Enable Beaconing check box to add a check mark, the amber
LED beacons (blinks) on the card that was the active card before switchover.
If a redundant card has failed, or is not installed, choosing Switchover
displays an error message explaining that two operational cards must be
installed to use this feature.
FRU Properties—This option displays a FRU Properties dialog box for the
module. Figure 15 is an example for the power supply module. The FRU
Properties dialog box includes the FRU name, position (slot number in the
backplane), state (active, backup, or failed), part number, and serial number.
FRU Properties—Choose this option to display a FRU Properties dialog
box for the card. Figure 15
FRU Properties dialog box includes the FRU name, position (slot number in
the backplane), state (active, backup, or failed), part number, and serial
number.
Enable Beaconing—Choose this option to add a check mark to the check box
and enable beaconing for the SBAR card. This causes the amber LED on the
card to flash to help you locate it in the unit.
Switchover—Choose this option to display the Switchover SBAR dialog
box, which is similar to the Switchover CTP dialog box (refer to
Click Switchover to switch operation from the active card to the backup card.
When switchover occurs, the green LED illuminates on the backup SBAR
card to indicate that it is now the active card.
Monitoring and Managing the Director
is an example for the power supply module. The
Figure 21).
83