HP Surestore 64 - Director Switch User Manual page 216

Information and Error Messages
Table 9: Product Manager Messages (Continued)
Disabling Insistent
Domain ID will disable
Fabric Binding. Do you
want to continue?
Disabling Switch
Binding will disable
Enterprise Fabric
Mode. Do you want to
continue?
Do you want to
continue with IPL?
Duplicate Community
names require
identical write
authorizations.
Enterprise Fabric Mode
will be disabled if any
of the following
parameters are
disabled: Insistent
Domain ID, Rerouting
Delay, Domain RSCNs.
Do you want to
continue?
Error retrieving port
information.
216
Message
Fabric Binding is
enabled through
HAFM and user
attempted to disable
Insistent Domain ID in
the Configure Switch
Parameters dialog box.
User attempted to
disable Switch Binding
through the Switch
Binding State Change
dialog box, but
Enterprise Fabric Mode
is enabled.
This message requests
confirmation to initial
program load (IPL) the
director.
Duplicate community
names are entered at
the Configure SNMP
dialog box, and have
different write
authorizations.
User attempted to
disable these
parameters in the
Configure Switch
Parameters dialog box
while the switch was
online, but Enterprise
Fabric Mode
(SANtegrity Binding
feature) is enabled.
An error occurred at
the
application while
retrieving port
information because
the Ethernet link is
down or busy.
Description
Product Manager
Director Product Manager User Guide
Action
Click Yes if you want to
continue and disable Fabric
Binding.
Disable Enterprise Fabric Mode
through the Enterprise Fabric
Mode dialog box before
disabling Switch Binding.
Click Yes to IPL the director or
Cancel to cancel the operation.
Delete the duplicate community
name or make the write
authorizations consistent.
Click Yes if you want to
continue, and disable
Enterprise Fabric Mode.
Retry the operation later. If the
condition persists, contact the
next level of support.