HP Surestore 64 - Director Switch User Manual page 209

Table 9: Product Manager Messages (Continued)
Cannot modify
director/switch speed.
Ports speeds cannot be
configured at a higher
data rate than the
director/switch speed.
Cannot perform this
operation while the
switch is offline.
Cannot retrieve current
SNMP configuration.
Cannot retrieve
diagnostics results.
Cannot retrieve port
configuration.
Cannot retrieve
information for port.
Director Product Manager User Guide
Message
Port speeds cannot be
configured at a higher
data rate than the
director speed. This
message displays
when you set director
sped to 1 GB/sec
through the Configure
Switch Parameters
dialog box and at least
one of the ports is
running at 2 Gb/sec.
This operation cannot
take place while the
director or switch is
offline.
The director SNMP
configuration cannot
be retrieved by the
Product Manager
application because
the Ethernet link is
down or busy.
Director diagnostic
results cannot be
retrieved by the
Product Manager
application because
the Ethernet link is
down or busy.
The port configuration
cannot be retrieved by
the
application because
the Ethernet link is
down or busy.
Port information
cannot be retrieved by
the
application because
the Ethernet link is
down or busy.
Description
Product Manager
Product Manager
Information and Error Messages
Action
Either return the director speed
to 2 Gb/sec or configure all
port data speeds to 1 Gb/sec
through the Configure Ports
dialog box.
Configure the director or switch
offline through the Set Offline
State dialog box and then retry
the operation.
Retry the operation later. If the
condition persists, contact the
next level of support.
Retry the operation later. If the
condition persists, contact the
next level of support.
Retry the operation later. If the
condition persists, contact the
next level of support.
Retry the operation later. If the
condition persists, contact the
next level of support.
209