Managing Stored Address Configurations - HP Surestore 64 - Director Switch User Manual

2. Enter information into the appropriate fields.
3. Click the squares to either prohibit or allow connections. In
4. Click Save As to open the Save Address Configuration As dialog box.
5. Click the Port Name field and enter a name.
6. Click OK to save changes and to close the Save Address Configuration As
7. In the Configure Addresses - "Active" dialog box, click Activate to activate
Note:
library without being activated.

Managing Stored Address Configurations

FICON management style only. Once addresses configurations are created
through the Configure Addresses - "Active" dialog box they are saved to the
Address Configuration Library. Use this procedure to manage address
configurations in the Address Configuration Library.
To manage saved library entries:
1. Choose Addresses from the Configure menu on the menu bar, and then
Director Product Manager User Guide
address 07 is prohibited from communicating with port address 05. Also, Port
OC is prohibited from communicating with all other port addresses.
Names must be between 1 and 8 characters in length. Valid characters are
uppercase A-Z, 0-9, hyphen (-), and underscore (_). The name may not be
CON, AUX, COMn (where n=1-9), LPTn (where n=1-9), NUL, or PRN.
Descriptions must be between 0 and 24 characters in length. Up to 24
alphanumeric characters allowed, including spaces, hyphens, and
underscores.
dialog box.
the configuration or click Cancel to close without activating.
If you click Cancel after saving, your configuration will still be added to the
choose Stored. The Address Configuration Library dialog box displays, as
shown in Figure 40.
Configuring the Director
Figure 39, port
139