Configuring the Director
Figure 40: Address Configuration Library dialog box
2. Choose a configuration entry by selecting a row. Then use one of the
140
procedures below.
To modify a stored configuration—Click Modify. The Configure
Addresses dialog box displays for the configuration. See
Port
Addresses" on page 136 for details on using this dialog box.
To delete a stored configuration—Click Delete. A warning displays
before deletion.
To copy a stored configuration—Click Copy to copy the configuration
and rename/describe it. When the Copy Address Configuration dialog
box displays, provide a name and description for the configuration.
Names must be between 1 and 8 characters in length. Valid characters are
uppercase A-Z, 0-9, hyphen (-), and underscore (_). The name may not be
CON, AUX, COMn (where n=1-9), LPTn (where n=1-9), NUL, or PRN.
Descriptions must be between 0 and 24 characters in length. Up to 24
alphanumeric characters are allowed, including spaces, hyphens and
underscores. Click OK and the configuration is added to the library.
To activate a stored configuration—Click the Activate button to
activate the configuration and send it to the switch for immediate use. A
warning displays before the action occurs.
Note:
If Active=Saved is enabled in through the Configure FICON
Management Server dialog box (Configure menu), this overwrites the current
IPL address configuration.
"Configuring
Director Product Manager User Guide