HP Surestore 64 - Director Switch User Manual page 132

Configuring the Director
Note:
data speeds.
132
— Set All LIN Alerts—Places a check mark in all check boxes in this
column. LIN alerts will be enabled for all ports on the switch.
Type (open systems management style only)
— Set All to F_Ports—Sets all fields in this column to F_Port and
configures all ports on the switch as F_Ports.
— Set All to G_Ports—Sets all fields in this column to G_Port and
configures all ports on the switch as G_Ports.
— Set All to E_Ports—Sets all fields in this column to E_Port and
configures all ports on the switch as E_Ports.
Port Binding
— Bind All WWNs—Places a check mark in all check boxes in this column
and binds each port to the device with the WWN or nickname entered in
the Bound WWN column for that port.
— Unbind All WWNs—Removes check marks in all check boxes in this
column. A device with any WWN can attach to all ports.
— Bind All Ports to Attached WWN—Places a check mark in all check
boxes in this column and binds each port to the device currently attached
to that port. The Bound WWN column will display that device's WWN.
— Bind Port to Attached WWN—Places a check mark in the check box for
the port where you clicked to display the menu. This binds that port to the
device currently attached to that port. The Bound WWN column will
display that device's WWN.
— Clear All Bound WWNs—Clears all WWNs listed in the Bound WWN
column.
Speed
— Set All to 1 Gb/sec—Sets the port optics to a 1 Gb/sec data rate.
— Set All to 2 Gb/sec—Sets the port optics to a 2 Gb/sec data rate.
— Set All to Negotiate—Allows the port to negotiate the data rate with the
attached device.
Your director model, firmware, and port cards may not allow 2 Gb/sec
Bound WWN
Director Product Manager User Guide