HP Surestore 64 - Director Switch User Manual page 226

Information and Error Messages
Table 9: Product Manager Messages (Continued)
R_A_TOV must be
greater than E_D_TOV.
Resource is
unavailable.
SANtegrity Feature not
installed. Please
contact your sales
representative.
Send firmware failed.
SNMP trap address
not defined.
Stop diagnostics failed.
The test is already
running.
Stop diagnostics failed.
The test was not
running.
226
Message
R_A_TOV must be
greater than E_D_TOV.
The specified operation
cannot be performed
because the product is
unavailable.
The user selected
Switch Binding from
the Configure menu,
but the optional
SANtegrity Binding
feature is not installed.
A firmware download
operation failed.
If an SNMP community
name is defined, a
corresponding SNMP
trap recipient address
must also be defined.
Diagnostics for the port
was not running and
Stop was selected on
the Port Diagnostics
dialog box.
Diagnostics quit for the
port for some reason,
but the Stop button
remains enabled.
This action failed
because the test was
not running.
Description
Change one of the values so
that R_A_TOV is greater than
E_D_TOV
Verify that the Ethernet
connection between the HAFM
server and the director is up or
available.
Install the SANtegrity Binding
key through the Configure
Feature Key dialog box before
using Switch Binding features.
Retry the firmware download
operation. If the problem
persists, contact the next level of
support.
Enter a corresponding SNMP
trap recipient address.
Verify port operation. Retry
diagnostics for the port and
choose Stop from the dialog
box. If problem persists, contact
the next level of support.
Informational message.
Director Product Manager User Guide
Action