HP Surestore 64 - Director Switch User Manual page 224

Information and Error Messages
Table 9: Product Manager Messages (Continued)
No firmware version
file was selected.
No firmware versions
to delete.
Nonredundant director
must be offline to
install firmware.
Not all of the optical
transceivers are
installed for this range
of ports.
Open Trunking is not
installed for this
product. Please
contact your sales
representative.
Performing this action
will overwrite the
date/time on the
switch.
Performing this
operation will change
the current state to
Offline.
224
Message
A file was not selected
in the Firmware Library
dialog box before an
action, such as modify
or send was
performed.
There are no firmware
versions in the
firmware library to
delete, therefore the
operation cannot be
performed.
If the director has only
one CTP card, the
director must be set
offline to install a
firmware version.
Some ports in the
specified range do not
have optical
transceivers installed.
The Open Trunking
feature key has not
been enabled. This
message only displays
if the optional Open
Trunking feature is
installed.
Warning that occurs
when configuring the
date and time through
the Configure Date
and Time dialog box,
that the new time or
date will overwrite the
existing time or date
set for the director or
switch.
This message requests
confirmation to set the
director offline.
Description
Click on a firmware version in
the dialog box to select it, then
perform the action again.
Informational message
only—no action is required.
Set the director offline and
install the firmware.
Use a port range that is valid
for the ports installed.
Enter the feature key into the
Configure Feature Key dialog
box and enable the key. If you
require a feature key, see your
account representative.
Verify that you want to
overwrite the current date or
time.
Click OK to set the director
offline or click Cancel to cancel
the operation.
Director Product Manager User Guide
Action