HP Surestore 64 - Director Switch User Manual page 95

Note:
display during Open Systems management style.
Director Product Manager User Guide
This column applies during FICON management style only and does not
Name—Displays the port name as configured through the Configure Ports
dialog box.
Block Config—Indicates the blocked or unblocked configuration of the port
as set through:
— The Configure Ports dialog box.
— The Block Port option is available through port right-click menus in the
Port Card View and the Block All Ports option on the port card's
right-click menus in the Port Card View and Hardware View.
— The Block Port option is also available on the port row right-click menus
in the Port List View, the port bar graph right-click menus in the
Performance View, and the Port secondary menu of the Product menu
on the menu bar.
Blocked states are:
— Blocked: Devices communicating with the port are prevented from
logging into the director or communicating with other devices attached to
director ports. A blocked port continuously transmits OLS.
— Unblocked: Devices communicating with the port can log into the
director and communicate with devices attached to any other unblocked
port in the same zone.
State—The following port operational states may display in this table. For
more information on these states and corresponding status symbol and LED
indicator operations in the Hardware View, see
page 112.
— No Light
— Online
— Offline
— Beaconing
— Link Reset
— Not Operational
— Not Installed
Monitoring and Managing the Director
"Port Operational States" on
95