Warning And Error Message Display; Clear Threshold Alerts; Clear Threshold Alerts Dialog Box - HP Surestore 64 - Director Switch User Manual

Warning and Error Message Display

Clear Threshold Alerts

Click this to display the Clear Threshold Alerts dialog box. Choose the
appropriate option to clear alerts for the selected port only or for all ports on the
director. This clears all attention indicators that notify users of threshold alerts in
dialog boxes and views. This action also restarts the notification interval and the
cumulative minutes for utilization % interval.
Figure 25: Clear Threshold Alerts dialog box
Director Product Manager User Guide
Detached WWN—Click this option and enter a World Wide Name (WWN)
in the proper format (xx.xx.xx.xx.xx.xx.xx.xx) or a nickname configured
through the Product Manager application. The device with this WWN or
nickname has exclusive communication privileges through the port if Port
Binding is enabled.
Note the following:
— If you do not enter a valid WWN or nickname in this field, but the Port
Binding check box is checked (enabled), then no devices can
communicate over the port.
— If you enter a WWN or nickname in this field and do not place a check in
the Port Binding check box, the WWN or nickname is stored, and all
devices can communicate over the port.
Activate—Click this button to activate settings in this dialog box.
If one or more of the nodes logged into a port does not match the WWN or
nickname configured in the field by the WWN option, a warning dialog box
displays after you activate the configuration. This warning box displays a list
of all nodes that will be logged off if you continue. If you click Continue on
the warning box, these nodes are logged off and the port only attaches to the
device with the WWN or nickname configured in the WWN field.
An error message displays after you activate the configuration if the format
for the WWN entered in the WWN field is not valid (not in
xx.xx.xx.xx.xx.xx.xx.xx format) or if you have entered a nickname that was
not configured through the Product Manager.
Monitoring and Managing the Director
93