HP Surestore 64 - Director Switch User Manual page 217

Table 9: Product Manager Messages (Continued)
Error retrieving port
statistics.
Error stopping port
diagnostics.
Error transferring files
< message >.
Field cannot be blank.
Feature not supported.
The director must be
running version
05.00.00 or higher.
Field has exceeded
maximum number of
characters.
File transfer aborted.
Director Product Manager User Guide
Message
An error occurred at
the
application while
retrieving port statistics
because the Ethernet
link is down or busy.
An error occurred at
the
application while
attempting to stop port
diagnostics from
running because the
Ethernet link is down
or busy.
An error occurred
while transferring files
from the PC hard drive
to the
Manager
The message varies,
depending on the
problem.
The data field requires
an entry and cannot
be left blank.
The enterprise
operating system
(E/OS) version on the
hardware product
(switch or director) is
lower than 05.00.00.
This message only
displays if the optional
OpenTrunking feature
is installed.
The maximum number
of data entry
characters allowed in
the field was exceeded.
The user aborted the
file transfer process.
Description
Product Manager
Product Manager
Product
application.
Information and Error Messages
Action
Retry the operation later. If the
condition persists, contact the
next level of support.
Retry the operation later. If the
condition persists, contact the
next level of support.
Try the file transfer operation
again. If the problem persists,
contact the next level of support.
Enter appropriate information
in the Data field.
Install E/OS version 5.00.00 or
higher on the hardware
product.
Enter the information using the
prescribed number of
characters.
Verify the file transfer is to be
aborted, then click OK to
continue.
217