HP Surestore 64 - Director Switch User Manual page 44

Product Manager Overview
44
IPL—Choose this option to initiate an initial program load (IPL) on the
director. A dialog box displays to allow you to confirm the IPL. Note that an
IPL does not affect any configuration settings done through the Product
Manager. Port operation is interrupted during the IPL. Refer to the HP
StorageWorks Director 2/64 Service Manual or HP StorageWorks Director
2/140 Service Manual for more information.
Set Online State—Choose this option to display the Set Online State dialog
box. Use this dialog box to change the online state of the director to offline or
online.
Firmware Library—Choose this option to display the Firmware Library
dialog box. This dialog box displays all firmware versions currently installed
on the HAFM server that can be downloaded to directors. Use this dialog box
to add a new firmware version to the HAFM server hard disk, modify the
description displayed for an existing version, delete a version from the PC, or
download (send) a version for operation on a director. For additional
information on using this option, refer to the HP StorageWorks Director 2/64
Service Manual or HP StorageWorks Director 2/140 Service Manual.
Enable E-Mail Notification—The Simple Mail Transfer Protocol (SMTP)
server and e-mail recipient addresses are configured in the HAFM application
(not in the Director's Product Manager). E-mail notification is also initially
enabled in the HAFM for all directors managed by the HAFM. Note, however,
that the E-Mail Notification option on the Product Manager's Maintenance
menu must be enabled (checked) for e-mail notification to occur for the
specific director.
The default setting for the Enable E-Mail Notification function is enabled
(checked). To disable the function, choose Enable E-Mail Notification from
the Maintenance menu to clear the check box. For additional information on
using this option, refer to
Enable Call Home Notification—Choose Enable Call Home Notification
from the Maintenance menu to enable the call-home function for the director.
For directors and switches installed in some legacy environments, call-home
notification requires installation of HP Proactive Service software. This
service is offered at no additional charge for subsystems covered under an
on-site warranty or on-site storage hardware support contract. To register or
order Proactive Service software, contact your HP customer service
representative.
"Enable E-Mail Notification" on page 178.
Director Product Manager User Guide