Editing The Switch Membership List - HP Surestore 64 - Director Switch User Manual

3. Click one of the Connection Policy options.
4. Click Activate to enable the changes and close the dialog box.
5. Edit the Switch Membership List through the Switch Binding Membership

Editing the Switch Membership List

1. Choose the Configure > Switch Binding > Edit Membership List from the
Director Product Manager User Guide
To enable Switch Binding (check mark is not in the Enable Switch
Binding check box), click the Enable Switch Binding check box to add a
check mark. Go on to step 3 to set the Connection Policy.
Restrict E_Ports. Select if you want to restrict connections from specific
switches to switch E_Ports. Switch WWNs can be added to the Switch
Membership List to allow connection and removed from the Membership
List to prohibit connection. Devices are allowed to connect to any F_Port.
Restrict F_Ports. Select if you want to restrict connections from specific
devices to switch F_Ports. Device WWNs can be added to the Switch
Membership List to allow connection and removed from the Membership
List to prohibit connection. Switches are allowed to connect to any
E_Port.
Restrict All. Select if you want to restrict connections from specific
devices to switch F_Ports and switches to switch E_Ports. Device and
switch WWNs can be added to the Switch Membership List to allow
connection and removed from the Membership List to prohibit
connection.
List dialog box to add or remove switches and devices that are allowed to
connect with the switch.
Product Manager window. The Switch Binding Membership List dialog
box displays, as shown in
The WWNs of devices and/or switches that can currently connect to switch
ports are listed in the Switch Membership List panel.
Figure 64.
Optional Features
193