HP Surestore 64 - Director Switch User Manual page 30

Product Manager Overview
30
Configure the management style between Open Systems and FICON
functions.
Configure the data speed for the director (Director 2/64 only) and for
individual ports.
Configure threshold alerts for ports.
Configure SNMP trap recipients and community names.
Configure the director name, location, description, and contact person.
Control individual Fibre Channel ports by blocking/unblocking operation,
enabling LIN alerts, Port Binding, setting data speeds, and running internal
and external loopback diagnostics.
Display FRU properties, such as the FRU name, physical position in the
director (chassis slot number), active or failed state, part number, and serial
number.
Display information for individual Fibre Channel ports, such as the port name,
port number, Fibre Channel address, operational state, type of port, and login
data.
Display information on nodes attached to ports.
Display port performance and statistics.
Display vital product data for the director, such as the system name,
description, contact person, location, status, model number, firmware and
Engineering Change (EC) level, and manufacturer.
Enable beaconing for ports and the director unit.
Enable channel wrap mode (FICON Management Style only).
Maintain a port address library (FICON Management Style only).
Monitor the operational status of the director and each of its hardware FRUs.
Perform an initial program load (IPL).
Perform maintenance tasks for the director, including maintaining firmware
levels, administering the call-home feature, accessing the director logs, and
collecting data to support failure analysis.
Reset port operation.
Run port diagnostics.
Set the date and time on the director.
Swap addresses between ports (FICON Management Style only).
Director Product Manager User Guide