A Storageworks Director Product Manager Messages; Product Manager Messages - HP Surestore 64 - Director Switch User Manual

Fw 05.01.00 and sw 07.01.00 - director product manager - user guide
Hide thumbs Also See for Surestore 64 - Director Switch:
Table of Contents

Advertisement

Information and Error Messages
StorageWorks Director Product Manager Messages
This section lists StorageWorks Director Product Manager information and error
messages in alphabetical order.
Table 9: Product Manager Messages
A Product Manager
instance is already
open.
Activating this
configuration will
overwrite the current
configuration.
All configuration
names must be unique.
All FPM ports will be
held inactive while the
director is configured
to 2 Gb/sec speed. Do
you want to continue?
All port names must be
unique.
Another Product
Manager is currently
performing a firmware
install.
Are you sure you want
to delete firmware
version?
206
Message
Only one instance of
the
application can be
open at one time.
Confirmation to
activate a new address
configuration.
All address
configurations must be
saved with unique
names.
Occurs when FPM
cards are installed in
the director and
director speed is being
set to 2 Gb/sec in the
Configure Switch
Parameters dialog box.
A duplicate Fibre
Channel port name
was configured. All
port names must be
unique.
Only one instance of
the
application can install
a firmware version to
the director at a time.
This message requests
confirmation to delete
a firmware version.
Firmware library can
store up to 8 firmware
versions.
Description
Product Manager
Product Manager
Director Product Manager User Guide
Action
Product
Close the open
Manager
application so the
desired instance of the
Manager
application can be
opened.
Click Yes to confirm activating
the new address configuration
or No to cancel the operation.
Save the configuration with a
different name that is unique to
all saved configurations.
Replace FPM cards with UPM
cards (UPM cards operate at 1
and 2 Gb/sec) or set the
director speed to 1 Gb/sec.
Reconfigure the Fibre Channel
port with a unique name.
Wait for the firmware
installation process to complete
and try the operation again.
Click Yes to delete the firmware
version or No to abort the
operation.
Product

Advertisement

Table of Contents
loading

This manual is also suitable for:

Director 2/64Director 2/140

Table of Contents