HP Surestore 64 - Director Switch User Manual page 99

Director Product Manager User Guide
— CTP—CTP card.
— SBAR—SBAR card.
— Port Card—The following acronyms may display to indicate the card's
port technology:
— GLSL—G_Port, long wave, single mode LC connector, 1 Gigabit
— GSML—G_Port, short wave, multimode, LC connector, 1 Gigabit
— GXXL—G_Port, mixed mode, LC connector, 1 Gigabit
— FPM—G_Port, small form factor optics (SFO) pluggable, FICON
port module, 1 Gigabit.
— UPM—G_Port, small form factor optics (SFP) pluggable, FICON
port module, 2 Gigabit.
— GSFM—G_Port, short wave, single mode, MT-RJ connector, 1
Gigabit
— GLSR—G_Port, short wave, single mode, MT-RJ connector, 1
Gigabit
— GXXR—G_Port, mixed mode, MT-RJ connector, 1 Gigabit
— GXXL—G_Port, mixed mode, LC connector, 1 Gigabit
— FAN—Fan module.
— PWR—Power supply.
Position—A number representing the FRU chassis position. The chassis
(slot) position for a non-redundant FRU is 0. The chassis positions for
redundant FRUs are 0 and 1. The chassis positions for port cards are from
0-63 on the Director 2/64, and 0-127 and 132-143 on the Director 2/140. Note
that for the Director 2/140, ports 128-131 are internal ports and not available
for external connections.
Status—The FRU status (Active or Backup).
Part Number—The FRU part number.
Serial Number— The FRU serial number.
Monitoring and Managing the Director
99