Configuring Ports In The Open Systems Management Style; Configure Ports Dialog Box (Open Systems Management Style) - HP Surestore 64 - Director Switch User Manual

Configuring Ports in the Open Systems Management Style

To configure ports in open systems management style, use the following steps:
1. Choose Ports from the Product Manager menu bar. The Configure Ports
Figure 36: Configure Ports dialog box (Open Systems management style)
Director Product Manager User Guide
— Bind All WWNs—Places a check mark in all check boxes in this column
and binds each port to the device with the WWN or nickname entered in
the Bound WWN column for that port.
— Unbind All WWNs—Removes check marks in all check boxes in this
column. A device with any WWN can attach to all ports.
— Bind All Ports to Attached WWN—Places a check mark in all check
boxes in this column and binds each port to the device currently attached
to that port. The Bound WWN column will display that device's WWN.
— Bind Port to Attached WWN—Places a check mark in the check box for
the port where you clicked to display the menu. This binds that port to the
device currently attached to that port. The Bound WWN column will
display that device's WWN.
— Clear All Bound WWNs—Clears all WWNs listed in the Bound WWN
column.
dialog box displays, as shown in Figure 36.
Configuring the Director
133