Show Statistics Traffic-Bytes - Fujitsu XG2000 Series User Manual

XG2000 series User's Guide

5.16.10 show statistics traffic-bytes

Function
Displays the accumulated number of bytes sent or received to and from each port after the system startup.
Prompt
xg> or xg#
Command syntax
show statistics traffic-bytes
Command type
Operation management command
Output form
xg# show statistics traffic-bytes
Traffic Statistics(Total Frame Bytes) 2007/01/22-19:22:55
==========================================================
[No.1]
Port
Link State/ STP State : Up/Forward
Tx-Frame Bytes
Rx-Frame Bytes
Port-Description
[No.2]
[No. ]
Displays statistics for each port.
Port
Displays the port numbers.
Link State/STP State
Displays the port state in the Link State or STP State format.
The Link State may indicate one of the following link states.
−
−
The STP State displays the current port status based on the STP (Spanning Tree Protocol).
Note that the STP State is not displayed if the Link State is down.
For port status details, see
Tx-Frame Bytes
Displays the accumulated number of bytes sent after the system startup.
Rx-Frame Bytes
Displays the accumulated number of bytes received after the system startup.
Port-Description
Displays port descriptions. If the port is not described, it will not display anything.
Up to 33 characters can be displayed.
: 1
: 71872
: 63424
: port_name1
Down
The port link is down.
Up
The port link is up.
All Rights Reserved, Copyright (C) PFU LIMITED 2009
"Spanning Tree Protocol Port
223/315
States".