Date Summer-Time - Fujitsu XG1200 User Manual

XG1200 User's Guide

5.4.14 date summer-time

Function
Sets the Day Light Saving Time.
Use the no form to return to the default setup.
Prompt
xg#
Command syntax
date summer-time START_DAY[/TIME] END_DAY[/TIME] [OFFSET]
Parameter
START_DAY[/TIME]
Specifies the day/time to start the Day Light Saving Time in any form of "Mm.w.d/hhmm," "Jn/hhmm," or "n/hhmm."
−
−
−
−
−
When hhmm is omitted, "0100" (an hour) is specified.
END_DAY[/TIME]
Specifies the day/time to end the Day Light Saving Time. The description format is the same as "START_DAY/TIME."
OFFSET
Specifies the time to set forward in the period of the Day Light Saving Time in the form of "hhmm."
−
−
When this parameter is omitted, "0100" (an hour) is specified.
Command type
Operation management commands
Default
None
Message
% DATE '%1$' is invalid
Explanation
The specification of date/time is incorrect.
[[Inserted string]]%1$: incorrect parameter value is displayed.
Solution
Correct the error of the parameter, and execute it again.
Mm.w.d
Specifies the day to start the Day Light Saving Time in m, w, and d.
Specify month for m (1 to 12), week for w (1 to 5), and day of the week for d (0 to 6).
w = 1 means the first week where d exists, and w = 5 means the last week.
d = 0 means Sunday.
Jn
Specifies the day to start the Day Light Saving Time in day of year (Julian day). In leap years, February 29th is
not counted. Specify a number in the range of 1 to 365 for n.
n
Specifies the day to start the Day Light Saving Time in day of year. In leap years, February 29th is counted.
Specify a number in the range of 1 to 365 for n.
Specifies the following values, for the first day of each month in "Jn" specification and "n" specification.
Month/Day
January 1st J1
February 1st J32
March 1st J60
April 1st J91
May 1st J121
June 1st J152
July 1st J182
August 1st J213
September 1st J244
October 1st J274
November 1st J305
December 1st J335
hh
Specifies the hour to start the Day Light Saving Time.
mm
Specifies the minute to start the Day Light Saving Time.
hh
Specifies the hour to set forward in the period of the Day Light Saving Time with a two-digit number. It can be
set in the range of 00 to 23.
mm
Specifies the minute to set forward in the period of the Day Light Saving Time with a two-digit number. It can be
set in the range of 00 to 59.
All Rights Reserved, Copyright (C) PFU LIMITED 2005
Jn specification
Common year
1
32
60
91
121
152
182
213
244
274
305
335
70/258
specification
Leap year
1
32
61
92
122
153
183
213
245
275
306
336