System Log Discriminator Settings; System Log Server Settings - Fujitsu SH-E514TR1 10 User Manual

SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual
Write Delay: Enter the interval for periodic writing of the logging buffer to FLASH. This value must be between 0 and
65535 seconds. By default, this value is 300 seconds. Tick Infinite to disable the write delay feature.
Click Apply to accept the changes made for each individual section.

System Log Discriminator Settings

This window is used to view and configure the system log's discriminator settings.
Figure 7-8 System Log Discriminator Settings
The fields that can be configured are described below:
Discriminator Name: Enter the discriminator name here. This name can be up to 15 characters long.
Action: Select the facility's behavior option and the type of facility that will be associated with the selected behavior
here. Behavior options to choose from are Drops and Includes.
Severity: Select the severity behavior option and the value of the type of information that will be logged. Behavior
options to choose from are Drops and Includes. Severity value options to choose from are 0 (Emergencies), 1
(Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging).
Click Apply to accept the changes made.
Click Delete to remove the specified entry.

System Log Server Settings

This window is used to view and configure system log's server settings.
Figure 7-9 System Log Server Settings
The fields that can be configured are described below:
Host IPv4 Address: Specifies the IPv4 address of the system log server.
UDP Port: Specifies the UDP port to which the server logs are sent. This value must be 514, or between 1024 and
65535. The default value is 514.
20