Additional Vga Source Controls - Smart Technologies SMART Board 600i4 Configuration And User's Manual

47 | CH A P T E R 4 – R E MO T E L Y M A N A G IN G Y O U R IN T ERAC T IVE WH IT EBOA RD
SYS TE M

Additional VGA Source Controls

Your VGA source supports all the general source controls described on page 45, as
well as the commands listed in this section. These settings are unavailable when the
projector is off, or when the VGA sources are disconnected.
NOTE
Some of these commands are invalid with composite video sources.
VGA Source Information Commands
These commands inform you of the current VGA source settings.
Command
get frequency
get tracking
get saturation
get tint
get sharpness
VGA Source Control Commands
These commands control the appearance of your VGA source. These settings are
unavailable when the projector is off, or when the VGA source is disconnected. See
page 42 for setting absolute and adjustment commands.
Command
set frequency [value]
set tracking [value]
set saturation [value]
set tint [value]
set sharpness [value]
Response
frequency=[current frequency setting]
tracking=[current tracking setting]
saturation=[current saturation setting]
tint=[current tint setting]
sharpness=[current sharpness setting]
Command Target Range
=-5 to =5
=0 to =63
=0 to =100
=0 to =100
=0 to =31
Response
frequency=[value]
tracking=[value]
saturation=[value]
tint=[value]
sharpness=[value]