Using Your Interactive Whiteboard; Using The Extended Control Panel (Ecp); Understanding Ecp Functions - Smart Technologies SMART Board 600i4 Configuration And User's Manual

31 | CH A P T E R 3 – U SIN G Y O UR IN T ER ACT IV E WH IT EB OARD SY ST EM

Using Your Interactive Whiteboard

Refer to the SMART Board 600 and D600 series Interactive Whiteboard Installation
and User's Guide for more information on using your interactive whiteboard.
When you connect your SMART Board interactive whiteboard system to a computer
with SMART Product Drivers and SMART software installed, you can access the
software's full capabilities. SMART Notebook enables you to capture and save your
notes to a SMART Notebook file, or write directly into any Ink Aware application. The
full capabilities of SMART Notebook include SMART Board Tools and a wide range of
digital content.
The SMART Notebook Help Center contains links to a wide range of information,
including procedures, concepts, help with applications, SMART Notebook tool
descriptions, troubleshooting hints and more. Access the Help Center by pressing the
Help button on the pen tray or from the SMART Board icon
notification area or Mac Dock.
For more resources, visit www2.smarttech.com/st/en-US/Country/, and then select
your country. In the Support section of this site, you'll find up-to-date, product-specific
information, including setup instructions and specifications. The
has free learning resources, hands-on lessons and information on how to get more
training.

Using the Extended Control Panel (ECP)

Understanding ECP Functions

The ECP gives you control of your interactive whiteboard system's basic options.
Additionally, you can connect peripheral device sources (or outputs) directly to the
ECP, as described on page 33. You can use the ECP's Power
remote control's Power
use the Input button (or the remote control's Input button) to switch sources on the
projector.
IMPORTANT
• There are no projector menu options on the ECP. Keep your remote control in
a safe place because the ECP is not a substitute for the remote control.
• Do not disconnect existing USB plugs on the ECP to connect other
peripherals, because you could disconnect controls for your interactive
whiteboard or host computer.
button) to turn on or turn off the projector system. You can
in the Windows
Training Center also
button (or the