Smart Technologies SMART Board 600i4 Configuration And User's Manual page 75

59 | CH A P T E R 4 – R E MO T E L Y M A N A G IN G Y O U R IN T ERAC T IVE WH IT EBOA RD
SYS TE M
Submenu Setting
Startup Screen
Video Mute
High Speed Fan
Projector Mode
Source
VGA1
VGA2
S-Video
Composite
Emergency Alert
Alarm Message
Description
Selects the type of startup screen to SMART or User.
The SMART screen is the default SMART logo on a
blue background. The User screen uses the saved
picture from the Capture User Startup Screen
function.
Turns the video mute setting On or Off. Select On to
hide the display and Off to show it again.
Adjusts the speed of the projector's fan. Select High
to set the fan to high speed. Select Normal to set the
fan to normal speed.
NOTE
Use the High setting when the projector's
temperature is high or the altitude is above 6000'
(1829 m).
Selects the projection mode (Front, Ceiling, Rear or
Rear Ceiling)
IMPORTANT
SMART recommends that you never change this
setting from the Ceiling projection mode.
Selects the input source (VGA1, VGA2, Composite
or S-Video).
Assigns an alternative name to your VGA1 input. This
name appears when you select the VGA1 input.
Assigns an alternative name to your VGA2 input. This
name appears when you select the VGA2 input.
Assigns an alternative name to your S-video input.
This name appears when you select the S-video
input.
Assigns an alternative name to your composite video
input. This name appears when you select the
composite video input.
Turns the on-screen alert broadcast message On or
Off. When enabled, this message displays over the
current projected image.
Displays an on-screen emergency notification
message (maximum 60 characters).