3D Settings; Network Settings - Smart Technologies SMART Board 600i4 Configuration And User's Manual

60 | CH A P T E R 4 – R E MO T E L Y M A N A G IN G Y O U R IN T ERAC T IVE WH IT EBOA RD
SYS TE M

3D Settings

This menu allows you to enable or disable 3D image display and set the format.
Submenu Setting
3D On/Off
3D Invert
3D Format

Network Settings

This menu allows you to enable or disable Dynamic Host Control Protocol (DHCP)
and set the network related addresses and names.
Submenu Setting
DHCP
IP Address
Subnet Mask
Gateway
DNS
Group Name
Projector Name
Description
Turns the 3D feature On or Off.
Selects the 3D Invert setting (L-R or R-L).
• L-R displays visual data for the left eye first.
• R-L displays visual data for the right eye first.
Selects the 3D format (Interleaved or Under-over).
• Interleaved breaks down the image frame for each
eye, alternately displaying a line of visual
information from each frame.
• Under-over concurrently displays horizontally
stretched image frames for each eye, one above
the other.
Description
Turns the network's DHCP On or Off.
• On automatically assigns the DHCP server's
IP address to the projector.
• Off enables you to assign an IP address manually.
Displays the projector's IP address in values between
0.0.0.0 and 255.255.255.255.
Displays the projector's subnet work mask number in
values between 0.0.0.0 and 255.255.255.255.
Displays the projector's default network gateway in
values between 0.0.0.0 and 255.255.255.255.
Displays the projector's primary domain name
number in values between 0.0.0.0 and
255.255.255.255.
Displays the projector's workgroup name (maximum
12 characters).
Displays the projector's name (maximum 12
characters).