Smart Technologies SMART Board 600i4 Configuration And User's Manual page 103

To replace the projector
on the boom
87 | CH A P T E R 6 – M A I N T A I NI NG Y O U R I NT E R A C T I V E W H I TE BO A R D S Y S T E M
Replacing the Projector
When you've replaced the lamp module and lamp cover, replace the projector
on the boom.
WARNING
Two people are required to replace the projector.
1. Using two hands, put the projector back on the boom by aligning the hooks with
the slots on the projector.
CAUTION
Hold the projector firmly when reattaching it to the boom.
2. Secure the projector to the plate with the screw that you retained when you
removed the projector from the boom.
WARNING
Be sure to replace this screw. Without it, the projector can fall from the boom
causing personal injury or damage to the projector.